Erosion Wattle Installation

How to Install Wattles

Erosion wattle installation will use stakes to hold the erosion control products in place. The erosion wattle is an effective BMP for filtration, sediment control, or silt containment. The erosion wattle will retain the sediment, silt, dirt and debris that occurs in the water flowing from your site, acting as a filter for the water flow. Available in diameters of 6 or 9 inches, erosion control wattles accommodate the filtration needs of your area. See below for more information on erosion wattle installation or Contact Us for more information.

For more information on erosion wattle installation, Contact Us or Call us for more information at 1-863-261-8388.

Our friendly staff is here to help you get the exact product you need!

Call Us! 1-863-261-8388
or Contact us for additional information.

Erosion Wattle Installation and Applications

See below for a list of areas where erosion wattle installation would be beneficial.

Inlet, Curb, or Street Drain Protection
Check Dams and Small Ditches
Perimeters of Construction Sites
Low-Flow Stream Banks
Small and Low-Grade Slopes

Questions about erosion wattle installation? Find out how we can help you. Call us at 1-863-261-8388 for more information or Contact Us through our webform.

Erosion Wattle Features

Exterior Material of Coir Twine Netting
Interior Material of Coir Fibers
6" or 9" Diameters
Cut and Rejoined to Reach Desired Lengths

Erosion Wattle Benefits

100 Percent Biodegradable
All-Natural, Environmentally Friendly
Easy Installation
Keeps You in Compliance
Protects Storm Drains and Construction Sites

Erosion Wattle Specifications

Diameter	6" (15 cm)	9" (23 cm)
Length	10' or 20' (3.05 m or 6.10 m)	10' or 20' (3.05 m or 6.10 m)
Weight	1.5 lbs/ft (2.23 kg/m)	3.0 lbs/ft (4.46 kg/m)
Density	7 lbs/cubic foot	7 lbs/cubic foot
Inner Core	Double Cleaned Unsorted Coir Fiber	Double Cleaned Unsorted Coir Fiber
Netting	Coir Twine with Knotted Junctions	Coir Twine with Knotted Junctions

Do you have questions about how to install wattles? We can help answer your questions. For more information give us a call at 1-863-261-8388 or Contact Us through our webform.

Wattle Installation with Biodegradable Stakes

Erosion wattle installation is similar to coir installation in that both erosion control product solutions will use either wood or biodegradable stakes to keep the erosion wattle in place. Erosion control wattle installation can be accomplished through the use of stakes that are placed either along the sides of the erosion wattle or through the erosion wattle to better keep it in place.

Use these tools for erosion wattle installation:

Wooden or Biodegradable Stakes
Staples
Heavy Materials (Sandbags)

Staples can also be used for wattle installation in order to stabilize the erosion wattle. In order to use this method of erosion control wattle installation, you will need to be performing the wattle installation on dirt, soil, or sediment. Alternatively, you can place an erosion wattle around a street drain or inlet for filtration purposes. In this instance, wooden stakes or biodegradable stakes would not be used for the erosion wattle installation. Weighted materials like sandbags or gravel bags will be necessary to keep the erosion wattle in place for maximum filtration.